REDZ Software

Software for the sites and the meters you look after

ZRSoftware.Cloud for meter reading, ZRAutomation.Cloud for running a site, the ZRobo and ZTerminal apps, abcZ for REDZ optical probes, and abcZ Network Tool for the REDZ devices on your network.

See the products
ZRAutomation.Cloud's web screen: a dashboard of a site's devices
ZRSoftware.Cloud's Analysis page: a line chart of active and reactive power of a demo meter over a week
The ZRAutomation.Cloud app's dashboard on a phone
ZRobo showing a complete meter reading from a simulated meter
ZTerminal running a script, with the commands sent and the replies
Products

One family of software

Meter reading

ZRSoftware

Meter reading in two programs: ZRSoftware.Cloud on your own PC, and the app on your phone.

Windows PC

ZRSoftware.Cloud

The new generation of ZR Software. It reads IEC 62056-21 and DLMS/COSEM meters from EMH, Iskra, Landis+Gyr, Itron and Cewe on your own Windows PC, with load profiles, tariffs, reports and exports.

About ZRSoftware.Cloud · Manual (opens in a new tab)
Android

ZRSoftware.Mobile

The mobile client of a ZRSoftware.Cloud site. Use it when you are away from the site PC.

About the app · Manual (opens in a new tab)
ZRSoftware.Cloud's Analysis page with a sample three-rate tariff selected and a chart of daily energy over two weeks
The Dashboard with the meter counts, the jobs of the last 24 hours, the next schedule and the lines.
Site automation

ZRAutomation

Site automation in two programs: the management software on a server at the site, and the app on your phone.

Server and web

ZRAutomation.Cloud

ZRAutomation.Cloud is the management software of a site. On a server at the site, it reads the inputs of the site's Modbus TCP devices every 3 seconds, drives their outputs, keeps their history, raises alarms and runs the site's time blocks and scenarios.

About ZRAutomation.Cloud · Manual (opens in a new tab) · Pricing
Android

ZRAutomation.Mobile

The mobile app shows the site on a phone, through remote access, and tells the phone about alarms.

About the app
A shared dashboard page with value, gauge, bar, trend, switch and button widgets
ZRAutomation phone app showing the Overview dashboard with greenhouse temperature and humidity, controls locked
Android app

ZTerminal

ZTerminal lets you use USB to serial converters based on FTDI and Prolific chips to control devices used in industry, such as modems and PLCs, from an Android device, without an additional PC.

About ZTerminal
ZTerminal's Serial Communication Settings: baud rate, data bits, parity and stop bits.
ZTerminal running a script, with the commands it sent and the replies in the log.
ZTerminal in HEX mode, showing a reply as hexadecimal bytes.
Windows app

abcZ

abcZ is a Windows program for REDZ optical probes. It finds your probes, reads what each probe reports about itself, and lets you change the probe's settings, read its Bluetooth or Wi-Fi module, update its firmware and read its diagnostic counters.

About abcZManual (opens in a new tab)
The abcZ window on the Devices page: a table with one row per probe and a column for each value read from it.
Windows tool

abcZ Network Tool

abcZ Network Tool finds REDZ devices on your network and shows the product, firmware version and build date of each one. It updates their firmware over the network, one device at a time or a whole list of devices, with an optional pilot device that goes first.

About abcZ Network ToolManual (opens in a new tab)
abcZ Network Tool, Discovery tab: four REDZ devices (one CKL gateway, three LKM gateways) with MAC, product, version and build date.

Questions? Write to hi@redz-sc.com or reach a distributor near you.

Contact and distributors